Відео

Beautiful 😍

Mercies as thank you brother (love inn Chwrist). God's uniquely fashioned footprints and love monger is more creative than the created, humans, the earFlings Songs of Solomon 8:6-7 + 26 Escape from the cruel ones withinn/others Ecclesiastes 7:16-18 Balance•s; The yin two the yangs and the Yang two the Yins PRO verbs and Pro verb (AGES) 22:14 Between gawd and the individual•s

A gallon of alcohol you must really be planning on running away from home

Thumb over airhole, got it.

all I can say is.. Better you than me. pointy metal screws in your tire= many flats., and a trashed tire.

I'm from Canada, and this American has the most stereo typical Canadian accent I've ever heard, eh.

Why did you cut the tube at the valve stem you could've left it as a circle

I use #6-32 pan head bolts with a small washer and then screw them into a t nut. Makes for a super beefy stud.

thankyou!

It went together easily in less than an hour. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.

The first thing you should do is RTFI THAT ARE PRINTED ON THE STOVES, and follow them. You obviously didn't do that. On the 442 it calls for only 25 pumps to keep from having extended yellow flames as you did with 40 or 50 pumps. Too much pressure over feeds and floods the generator. Too little pressure will also flood the generator as will turning it to low to try to throttle the flames. The instructions are printed on the tank. On the 502 you open the control knob only 1/4 turn to activate the instant lighting air induction circuit to keep from flooding the generator as you did here. On that stove the instructions are on the tank AND the knob. Wow! On the big 2 burner, you almost had it. But the lever is a lighting lever only, and has NO CONNECTION WITH CLEANING THE GAS TIP. Spinning it does nothing of value. It appears you overpressurized it too, but the rest was ok. Those instructions are printed on the inside of the lid with "UP TO LIGHT DOWN TO BURN" or words to that affect with an arrow pointing to the lever on the tank.

The best part about this female is that she has no idea she is a 9/10

What kind of fuel are you using? Gasoline? Or kerosene? Or something else???

Thanks

Lmfaoooo

DIY studs give more traction. Great tip with the rear tire, I only did 2 lines of screws towards the centre tread, tested it out today and I had the best traction ever!

good job man. i did the same thing with a mt ebike fat tire setup. although think of getting the wafered flat stel sheet metal screws as ive found they give a huge bite. the flat wafered screw holds the screw well. i also used a bunch of glue and spread over and into the threads like locktite. used a coat of flex seal i had laying around then ducktape and then tube. work amazing. love doin cheep stuff like this. 10 bucks. i took a tire i was going to throw out... had no treat at all so i used it for the winter. perfect!

Power tools might help this job along

thanks a lot

What....what ...what....puncture puncture puncture you like punctures then 30 yards ,meters just invest in purpose made tyre no metal in contact with inner tubes yes can be pricey in season for occasional use out of season maybe 30 per cent cheaper

This guy is not doing it correctly! Instructions say open only 1/4 turn, not all the way. If you follow this idiot, you will get burnt!

Not going to be able to pump it 40 times!

Should work better with tubeless, shouldn't it? My MTB's front tire is starting to show it's. Might try to spike it, add a tire liner and new sealant. And replace that shitty presta valve.

Get started in early fall so u ready before end of winter or just get a job and buy nice studded tires. That’s just me GOOD LUCK

Perfect! Just what I was looking for.

You talk too much!

Eu nem falo inglês porém sei o que entendi graças a esse grande homem temos a disfunção do surf como vemos hoje em dia. Parabéns Tom Blake. The big men surf...

Thicker backing helps .. maybe some PL400 glue?

What size is the punch tool?

Thanks

Can you remove the tires after winter and the tires still be okay?

Get into Duluth ua-cam.com/video/fQR9BY2nVyY/v-deo.html

Wish I had seen this first, every video of lighting a coleman camp stove and noone said , cover the hole. I feel dumb for not knowing that lol

sick noises. thats dope. :)

m-i-c.... k-e-y....

WTF? 170K people came her to see how to light a stove? The world is Doomed!

I NEED TO FIND SENOR BLAKES GRAVESITE IN ASHLAND WI. ALL AMERICAN PATRIOT SURFER TOMMY THOMPSON..Hawaii surfer 1960 to 1978......!! god is nature.

What is the name of that set-up you had in the first part of the vid, I' like to get one. Thank you.

Use small nuts and bolts. Sharpen the end of the bolts. Use washers on the inside so you reduce tire flex. Line the inner tire with duct tape AND an old tube after installing. I used a drill press and a 1/8 inch drill bit. I also used old baldies in order to get more life out of them. Be forewarned, they don't last long. Couple of months, tops.

Great presentation

Wow this takes me back 30 years!!! I did this and it sure works. I found steep hill that was solid hard ice. I spent hours climbing it. It really works well. I used an skinny tire with its sides cut off to line the tire to protect the tube. It’s a little tight. I never tried just tube. People this works so much safer in winter

I would use actural carbide studs

Capó sos el mejor q gran video

*I love this guy>>>**ur2.pl/1095** Easy to clean as long as you clean it up after every grilling. What I like most about this is how fast it will cook your burgers and hotdogs. It doesnt use a lot of propane and I am still on my 2nd bottle. I bought the adapter for the bigger tank but I have not used it yet. You will love this versatility of this grill, fold up and store anywhere.*

Think I might try this on an old tire, but go tubeless. See how much sealant it takes to seal up all of the screws...

why did you fill it with Rooster brand Sriracha sauce???

Making lemonade..... You're doing it wrong

The cam buckle does not look tight enough. Use pool noodles, attach them to the gunwhales. The foam cracks.

I like the idea of the small stove for camping/a survival stove. What is the brand of the fuel bottle you are using? I like the pour factor of the bottle.

She has a huge pimple on her nose. You'd think that she'd done something about that before making a video.